Fitting

All fixtures and fittings are included in the box so you can put your Mirror/Cabinet on the wall/table as soon as you receive it. If you need more information then please call or email for a full explanation on fitting and how the Mirror/Cabinet and its different features works.

Technical Info

• Bluetooth™ Specification
• Bluetooth™ , 3.0+EDR compliant
• Typical +2dBm Class 2 output power
• Receiver Sensitivity: GFSK typical -90dBm,


• Amplifier Specification
• 0.03% THD+N @10W 4ohm
• 0.1% THD+N@12W 4ohm
• 0.18% IHF+IM@1W 4ohm
• High power
• 25W@4 ohm,10% THD+N Vdd=14.6V
• 22W@4 ohm,10% THD+N Vdd=13.5V
• 13W@8ohm ,10% THD+ N Vdd+13.5V
• Class-T architecture
• High efficiency
• 88% @12W 8ohm
• 81% @ 20W 4ohm
• Dynamic range=99dB
• Over-current protection
• Over-temperature protection


• Speaker Specification 
• Frequency Response: 105Hz - 18KHz
• Impedance: 4 ohms
• Power: 40W Max


• Mirror Cabinet Specification
• 108 x 0.1 watt white LED's.
• 18 x 0.1 watt white LED's for internal Cabinet lighting.
• Built-in full size demister pad fitted to rear of door that switches on and off with cabinet lights.
• Internal 240 volt shaver socket with integral on/off rocker switch.
• Shaver socket can be used with lights off.
• Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink.
• The cabinet has a 2mm beveled edge.
• Beautiful Highest Quality Aluminium Chassis.
• Soft close Hinges with easy clip doors.
• Fully adjustable shelf holders.
• This cabinet needs to be connected to an earth wire.
• Please ask a professional if you are not capable of fitting yourself.
• The cabinet is in accordance with IP44, CE and RoHS regulations.
• Net weight 19Kg.